Ksenia
"Bonsai gold in a stone" - the height of 25-30 cm.
Good day, as they say, "by popular demand" to present to you another master class on weaving bonsai. I have already talked about the buttonhole technique of weaving bonsai, but in this tutorial I would like to pay special attention not usual trunk of the tree and the location on the stone. Let's get started ....
For work, we need:
- Beads - 200gr. and more (depending on the desired size of a tree and have patience)
A little about the choice of color and size of the beads. Color - I chose my favorite gold - or rather a mix of tones from light honey and amber to dark brown. Size - small, medium, large - that was all mixed up and it turned out ... amazingly beautiful (and very convenient - a great way to use leftovers).
- Whirlpool provolone- 2-3 coils
- aluminum wire for the frame - 1-2 m.
- Form to fill the stand
- thread (or floss silk shoe)
- decor (large stones, large stones (flat), seashells, sand)
- Paint gouache (watercolor, acrylic) brown, black gouache, gouache white
- Plaster
- PVA glue
- clear lacquer spray car
STEP 1. WEAVE TWIGS BONSAI.
Like many of the start weaving with training low. To do this in a small container, mix all the prepared beads and start it at the bottom of the wire. For gold beaded wire is better to pick the appropriate shade. You can use the more laborious method - expanded beads in various containers and bottom beads alternating color (choosing colors in a smooth transition). But I chose a 9-colors and 3 sizes, so I decided that it would be easier to mix things up. Low production lengths of 5-7 meters. Low was not cut from the coil and start to weave.
Stepping back from the edge of 10-15 cm. Free wire loops begin weaving. Loops consist of about 13-15 beads or 2 cm. Low. A little later, you can determine the number of beads in the loop on the eye. Loops are close to each other - at a distance of 5-7 mm. On one blank must vyplesti 12-15 eyelets. From the last loop is indented 10-15cm free wire and cropped. (See photo).
Starting from the lastloop,turn preform tube forming a kind of "bumps." The free end of the wire tying the knot, Pass the ends through the core bumps.
In this way produces about 90 120 balls.
STEP 2: BUILD BONSAI BRANCHES AND TRUNK.
For harvesting sprigs be finely framed or floral wire - lengths of about 15 cm. The diameter of the wire frame - 1-1.5 mm. Durable nylon thread brown or light brown. On the piece of wire primatyvaem harvested "bumps", departing 5-7 mm from the edge knobs (see. Photo). 7-10 mm primatyvaem next workpiece. IMPORTANT. Preform is placed in the same plane (on one side of the wire frame). At one place the workpiece sprigs of 3 to 5-knobs.
Take a few pieces of branches of 3 knobs - of these pieces will form the tip of the bonsai. For lush crown must bude about 3-4 small sprigs.
These are the blanks allow you to weave a classic Japanese bonsai any form. I would like to tell you a bit about the forms of bonsai. Conventional forms large set that gives fertile ground for your creativity. Below I have described the stem and crown of each of the styles, it will allow you to properly form of blanks crown.
Tёkkan (Chokkan) Formal direct style (tёkkan) - in this traditional-style trunk remains straight, thickening at the roots.
Moёgi (Moyogi) The tree, grown in the informal literal style (moёgi), branches or trunk may be slightly curved. The top of the barrel is always on a straight line perpendicular to the outgoing ground at the spot where the root begins.
Sokan (Sokan) juice ("double barrel") - is a composition different from the others by the presence of two trunks. They may be different in size and form a crown.
Shakai (Shakan) Italic style (shakai) is different from the formal style of direct only that the growth of the tree goes at an angle to the ground.
Kengay (Kengai) Cascade (kengay) simulates the growth of trees near the water or in the mountains. In full cascade tree top grows abroad pot and falls well below the soil being in a pot.
Khan kengay (Han-Kengai) Khan kengay - polukaskadny style. At the top of the tree climbing polukaskade remains at ground level bowls.
Budzingi (Bunjingi) (literary style) "Style pundits" is characterized by a straight trunk of a tree, with a minimum of branches.
Sekidzёdzyu (Sekijoju) Sekidzёdzyu - "root on the rock" - a tree (often fig) growing on the rock. The barrel is directly on the stone, and the roots of his intricately entwine.
Isidzuki (Ishitsuki) Isidzuki or "growing-on-rock" style similar to the style sekidzёdzyu, but in this case, the roots of a tree growing in the crevices of the rock. Since a space for roots in this case a little bit, this style is used for illustration of the tree of endurance.
Hokidati (Hokidachi) Hokidati - "Style brooms" - used on trees with spreading branches. Trunk remains straight and branch grow around approximately 1/3 of the height of the tree, whereby the leaves form a shape similar to a sphere.
Youse me (Youse-me) «Yose me" , or a group of trees - a style in which grow more than 9 trees in a single composition. Their number may vary, but is almost never equal to 4 (the word "si", "four", the Japanese consonant with the word "death"). Often in the pot plant trees of the same species, and the beauty of the composition lies in the combination of heights and ages of the trees.
Ikadabuki (Ikadabuki) multilateral style ikadabuki (plotoobrazny style), characterized in that it simulates a tree that fell into the swamp, the base is in the shape of the raft and formed a trunk lying on the ground, from which the trees grow raznovelikie.
When you have decided on the form of bonsai need to draw a sketch and prepared a sketch to start assembly. Larger branches are formed from blanks on framing a wire diameter of 2 - 2.5 mm. Stretches framing wire take a longer 30-35 cm. Then all of these will form roots. Fasten branches using nylon thread.
STEP 3. PLANTING AND DESIGN OF THE TRUNK.
We select a mold base. For this purpose perfectly fit the various boxes of butter or margarine. Glass or very dense plastic boxes are better not to use such forms of TK to get the stand will be very difficult.
In the selected tank fill grout gypsum and gypsum while not omit it froze the roots of the tree. The distance between the trunk and the stand should be a little more than you have prepared stone. Leave a work before drying stand.
When the stand has dried, you can proceed with the coating solution branches gypsum. Bottom of the barrel seemed a bit boring, so I made the effect of the cracked bark. Form stands can always correct - slightly repulsed extra edge or to file them with sandpaper.
If the solution of gypsum reacted with wire and made rust, apply several layers of a liquid solution, adding a bit of PVA glue.
STEP 4. PAINTING. CLEARANCE.
Stained trunk brown paint. If you are using gouache, apply several coats of paint. After drying, the pitch can be set off the bark with white paint. For this semi-stiff brush be clearly horizontal strokes across the surface of the trunk.
Stand Colors the black gouache. Remove excess paint with a damp sponge. You can also set off the white gouache relief. The same technique as in the operation with the barrel.
Next, decorate as desired. Originally selected stone me in the end did not like and decided to form an alpine slide of several stones. The central stone set on the solution of gypsum. I also use natural sea stones, moss and twigs of beads - to put the selected item of decoration you can use plaster or PVA glue.
The final stage - cover the entire article colorless aerosol lacquer.
Post a Comment Blogger Facebook